实验室热压成型机，压片机

实验室热压成型机是制备具有可再重复特性样品的重要工具。压板表面的温度分布均匀，保证样品厚度恒定的机械坚固性和—致的闭合力是保证这—结果的基本因素。
主要特点
．配有4列（直径60毫米）的机械结构和由自润滑衬套驱动的滑动压板
．厚度为40毫米的250x250毫米镀铬钢压板
．专门设计的平面加热元件，以确保压板表面温度分布均匀
．封闭成型区，便于烟雾抽吸
．配有安全锁的防护门
．CE标签附件
．配有触摸屏显示器的自动压力控制：允许设置成型循环
．冷却系统：控制压板的冷却以模制热塑性产品
．闭合力控制：允许在成型循环的每—步连续调节闭合力。
．Press—Control软件：允许记录和存储每个成型循环的成型条件
．根据标准生产板材和不同类型样品的模具
Max useable platen surface: 250 mm x 250 mm
Max closure force: 25 Tons
Temperatures: Up to 250°C (300°C optional). 0.1°C Resolution
Touch Screen PLC controller (optional): PLC with touch-screen display. Permits to:; - set 
displacements of the moving plate; - set the tempera- tures.; - activate the cooling and cooling rate (with cooling option); - set closure force (with force regulation option)
Closure Force Regulator (optional): Special hydraulic setup for conti- nuous regulation of the 
closure force. Adjustable closure force between 6 and 250kN. Regulation error <10%.
Platen cooling (optional): Press Platens with water cooling circuit; The control of the cooling and of the cooling rate is controlled by the PLC controller; The connection to a water source or a Chiller is required         (fittings 1/4  )